Approved to UL standards (NRTLC) (115V only). CSA approved (115V only). The RIDGID 10973 122XL Copper Cutting and Prep Machine is designed to cut, clean and deburr copper and stainless steel tubing and fittings quickly and professionally. Cutting is performed by turning the tubing with motor-driven rollers, while a cutter wheel is manually actuated by a rack and pinion. Guide rollers ensure a straight cut with no tracking. For thorough cleaning and deburring, the pipe machine comes with a range of accessories. A rugged outside diameter cleaning brush cleans tubing quickly with minimal effort in preparation for joining. A core reamer easily removes turbulence-causing burrs. 8 optional, individual size brushes attach to a quick-change collet for cleaning the inside of fittings, and an outside diameter deburring disk cleans burrs from the outside surface of the tubing. Built for durability and long tool life, the pipe cutting machine has rugged cast aluminum housing and a powerful 1/3 HP induction motor that drives rollers at 300 RPM. For ease of use, it features an adjustable cutting handle to accommodate different diameter tubes, a handy built-in 1/2-inch incremental scale for quick and easy measuring and a built-in storage shelf to keep fittings organized. The machine weighs only 72 pounds and has a large carrying handle for easy transport to the jobsite. This copper pipe cutter has a 1/2-inch to 4-inch pipe capacity. Suitable for use with copper tubing and fittings (Types K, L and M) and stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm). Includes an outside diameter cleaning brush, cone reamer (single flute cone, RH, 1/2 inch to 2 inch), outside diameter deburring disk, fitting brush kit with 8 brushes, storage rack and quick-change collet and operator’s manual. Easily mounts to model 1206 stand for jobsite use. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.
From the Manufacturer
Rigid 10973 122XL 115Volts Copper Cutting Prep Machine are designed to cut, clean, ream, and debur copper tubing and fittings quickly and professionally. Weighing only 80 pounds and possessing a conveniently located carrying handle, the Model 122XL are ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assure long life. The 1/3 HP induction motor drives the rollers at 300 repetitions per minute. The 122XL 115Volts Copper Cutting Prep Machine has an O.D. cleaning brush that cleans tubing quickly with minimal effort and has a core reamer which easily adjusts to accommodate different tubing sizes. The guide rollers ensure a straight cut with no tracking and the cutter wheel has been tested to cut over 10,000 cuts. The 122XL 115Volts Copper Cutting Prep Machine has a on/off toggle switch and the core reamer has a maximum pipe size of 2-inches in diameter. The model 122XL capacity for copper tubing and copper fittings are 1/2 – 4-inches. The 122XL 115Volts Copper Cutting Prep Machine has a fitting brush kit which includes six brushes, storage rack and collet.